Common grade and use of stainless steel materials
Time of Release:
2020-10-16 11:38
Source:
Common stainless steel grades and main uses |
|||
Card no |
The class type |
With the way | |
1Cr18Ni9Ti |
Austenitic body type | The most widely used, suitable for food, chemical, pharmaceutical, atomic energy industry | |
0Cr25Ni20 |
Austenitic body type | Material for furnace, material for automobile exhaust purification device | |
1Cr18Ni9 |
Austenitic body type | After cold processing has high strength, decorative components for construction | |
0Cr18Ni9 |
Austenitic body type | As the most widely used stainless heat resistant steel, food equipment, general chemical equipment, atomic energy industry | |
00Cr19Ni10 |
Austenitic body type | It is used for outdoor machine, building materials, heat-resistant parts and parts with difficulty in heat treatment in chemical, coal and petroleum industries which require high resistance to intergranular corrosion | |
0Cr17Ni12Mo2 |
Austenitic body type | Suitable for pitting corrosion resistant materials in seawater and other media, photography, food industry, facilities in coastal areas, ropes, CD rods, bolts, nuts | |
00Cr17Ni14Mo2 |
Austenitic body type | 0Cr17Ni12Mo2 ultra-low carbon steel for products with special requirements for resistance to intergranular corrosion | |
1Cr18Ni12Mo2Ti |
Austenitic body type | Used to resist sulfuric acid, phosphoric acid, formic acid, acetic acid equipment, has good resistance to intergranular corrosion | |
0Cr18Ni12Mo2Ti |
Austenitic body type | Same as above | |
0Cr18Ni10Ti |
Austenitic body type | Ti is added to improve intergranular corrosion resistance and is not recommended as a decorative component | |
0Cr16Ni14 |
Austenitic body type | Non - magnetic stainless steel for electronic components | |
0-1Cr20Ni14Si2 |
Austenitic body type | With high temperature strength and oxidation resistance, sensitive to sulfur-containing atmosphere, precipitated phase embrittlement tendency at 600-800℃, suitable for the production of various furnace components under stress | |
1Cr17Ni7 |
Austenitic body type | Suitable for high strength components, train and passenger car materials | |
00Cr18Ni5Mo3Si2 |
Austenitic body type plus ferrite | Good stress corrosion rupture resistance, with high strength, suitable for chlorine ion containing environment, used in oil refining, fertilizer, paper making, petroleum, chemical industry, manufacturing heat exchanger, condenser and so on | |
0Cr17(Ti) |
Iron body type | Used for stamping parts of washing machine inner drum, decoration | |
00Cr12Ti |
Iron body type | Used for automobile silencer tube, decoration | |
0Cr13Al |
Iron body type | Cooling from high temperatures without significant hardening, steam turbine materials, quenched components, composite steels | |
1Cr17 |
Iron body type | General purpose steel with good corrosion resistance, for interior decoration of buildings, heavy oil burning parts, for household appliances, household electrical parts | |
0Cr13 |
Iron body type | For high toughness and impact load parts, such as turbine blades, structural frames, bolts, nuts, etc | |
1Cr13 |
Martensitic body type | With good corrosion resistance, machinability, used for general purposes, blade machine parts, petroleum refining devices, bolts, nuts, pump rods, tableware and so on | |
2Cr13 |
Martensitic body type | High hardness and good corrosion resistance under quenching condition, used as turbine blade, tableware (knife) | |
|
Related News
What are the characteristics of stainless steel processing
Stainless steel processing manufacturers believe that the mechanical properties of investment cast stainless steel are higher than cast iron, because of its high melting point, easy oxidation of molten steel, poor liquidity of molten steel, large shrinkage rate, volume shrinkage rate of 10-14%, line shrinkage rate of 1.8-2.5%. In order to prevent defects such as insufficient pouring, cold isolation, shrinkage cavity and porosity, crack and sand adhesion of steel castings, more complex technological measures should be taken than that of cast iron:
Stainless steel processing surface treatment process what?
Stainless steel processing surface treatment process and construction process details, stainless steel processing surface treatment process what? We can common stainless steel surface treatment technology processes are: drawing, mirror, sandblasting, titanium plating, etching, anti-fingerprint, there are many students in the interior decoration of wonderful applications.
Stainless steel processing characteristics
Stainless steel processing characteristics Stainless steel processing characteristics are: high cutting temperature, cutting is not easy to break, easy to combine, cutting force, serious hardening, tool wear. Stainless steel refers to alloy steel with chromium content greater than 12% or nickel content greater than 8%. This steel has China's certain corrosion resistance in atmospheric or corrosive environmental media, and can be used at a higher operating temperature (> 450℃). It has very high strength.
Pangyi Metalware (Shanghai) Co., Ltd.
Pangyi Metalware (Shanghai) Co., Ltd.
Add:No.555 Longpan Road, Malu, Jiading District, Shanghai, China

Public
Copyright©2022 Pangyi Metalware (Shanghai) Co., Ltd. 沪ICP备10035938号-4
Enterprise mailbox Powered by www.300.cn