News
News

Stainless steel processing surface treatment process what?


Stainless steel processing surface treatment process and construction process details, stainless steel processing surface treatment process what?

We can common stainless steel surface treatment technology processes are: drawing, mirror, sandblasting, titanium plating, etching, anti-fingerprint, there are many students in the interior decoration of wonderful applications.

11

  

Stainless steel processing surface treatment process:

1. Drawing (matte) :

Usually, the surface state of stainless steel after mechanical friction processing is straight (also known as frosted), including wire drawing, lines and ripples.

Processing quality standard: the texture thickness is uniform, the texture of each side of the product is natural and beautiful according to the design and construction requirements, the bending position of the product is allowed to have a slight messy texture, does not affect the appearance.

2. Mirror:

Using high quality whetstone, diamond grinding paste and different grades of sandpaper, using polishing grinding equipment, rough grinding, medium grinding, fine grinding, get bright surface effect.

Mirror stainless steel wall top molding

3. Sandblasting (shot) :

Compressed air is used as power to form a high-speed jet beam. The spray material (quartz sand, emery) is sprayed to the workpiece surface for high-speed treatment, so that the board surface presents a fine bead sand surface, forming a unique decorative effect

4. Etching:

The process design principle of chemical etching pattern text on the surface of stainless steel material is that the parts that are not etched between the surfaces can be covered with a special anticorrosive layer, shielding the acid, so that the acid can only contact the surface. Etched parts, etched patterns and patterns can be obtained from the surface. The purpose of the text.

5, titanium plating:

Also known as stainless steel titanium zirconium coating, is in a vacuum container, on the surface of stainless steel to form titanium zirconium composite ionic film layer, the film layer in outdoor environment for many years does not fade.

Titanium plating principle: In vacuum titanium furnace at high temperature, titanium and zirconium metal can ionize metal or alloy vapor by learning inertia and glow discharge of gas, and accelerate ion deposition on the negative electrode under the action of electric field. The charged stainless steel plate forms the color. Rich and gorgeous metal film.

6, anti-fingerprint:

Stainless steel anti-fingerprint plate is a composite coated plate obtained by anti-fingerprint processing on the surface of stainless steel. The main coating method is roller coating.

Anti - fingerprint processing process was originally designed to meet the needs of users in the field of home appliances. In the process of production and development, due to the need of traditional technology, many parts need to be touched manually for many times, and sweat stains can easily form environmental pollution on the surface of parts, affecting the appearance. The development of fingerprint resistant plate that is the beginning.

Stainless steel processing preventive measures:

(1) The veneer surface should be smooth, clean, beautiful, uniform color, no scratches, pits, salt warps, wrinkles and damage.

(2) Veneer seams and joints: the seams are smooth and tight, without obvious gaps and dislocation. The joint is straight and the width is the same, and the plate is closely connected with the seal; The cutting size is accurate, and the seams of the protruding parts such as corners, line corners and sleeves are straight and neat;

(3) Decoration company panel caulking: caulking should be dense, straight, smooth, beautiful, straight line without seams, width and depth should be consistent, in line with the development requirements of teaching design.

(4) Holes of the veneer: sleeves cooperate with each other, edges are neat, and the connection with other professional equipment should be in the correct position, which is beautiful, tight and seamless.

Related News


What are the methods of sheet metal processing

Various processes can be completed through sheet metal processing. For example, in the processing of hardware products, this process can be used for processing and production. At the same time, it can complete the processing of various small parts, and also can realize the processing output. In terms of cost control, the standard is more reasonable, so many industries take it seriously.


Application field of sheet metal processing industry

Sheet metal processing is actually the processing of metal products, and more importantly, the transformation of metal plate to achieve its use in many different places. The process includes stamping, cutting and cutting to change the characteristics and shape of the metal. The application of this technology not only brings great convenience to people's life, but also promotes the development of our country's mechanical industry. For the sheet metal processing industry, there are many aspects of understanding that can be applied.


What problems should you pay attention to in sheet metal bending?

As the industry continues to develop, we know a lot of processing techniques, and we still use these processing techniques. This is sheet metal working. What should I pay attention to when bending sheet metal?

Pangyi Metalware (Shanghai) Co., Ltd.

Tel:021-59156788

Tel:13801763818(Mr. Pang)

Pangyi Metalware (Shanghai) Co., Ltd.

Add:No.555 Longpan Road, Malu, Jiading District, Shanghai, China

Pangyi Metaware (Shanghai) Co., Ltd.

Public

Copyright©2022 Pangyi Metalware (Shanghai) Co., Ltd.    沪ICP备10035938号-4

Enterprise mailbox    Powered by www.300.cn